Pumps For Sale

Coates Services Indonesia is your dewatering solution in Indonesia. Whether you want to move large volumes of water or when water needs to move over a large distance, talk to our pump specialists who can a tailor a solution for you.

Whatever your pumping needs, we have the solutions including specialized high head and high flow applications.

– Heads up to 200m, flows up to 345L/sec
– Simple or staged solution
– Stand-by pumps
– Water management capabilities
– Convenient, efficient service
– Environmental control solution
– Solutions around friction loss and water temperature

Available on:

HL 260 Pump

Features:
  • Fully automatic priming from dry to 28' (8.5 m) of suction lift.
  • Direct drive automatic priming high volume centrifugal pumps with Godwin’s original double venturi Dri-Prime priming system. Also available in electric drive.
  • Extensive application flexibility — will handle raw sewage, slurries and liquids with solids up to 2" (50 mm) in diameter.
  • Dry running, high pressure oil bath mechanical seal with abrasion-resistant solid silicon carbide faces.
  • All cast steel construction with cast steel impeller.
  • Standard Caterpillar C-18 engine.
HL 200 Pump
  • Fully automatic priming from dry to 28 feet (8.5M) of suction lift. Maximum heads to 380 feet (116M). Maximum flows to 3,600 gpm (227 l/sec.).
  • Handles liquids with solids up to 2-9/16" (65mm) in diameter.
  • Continuously operated venturi air ejector priming system operated by an air compressor requiring no form of periodic adjustment or operator intervention.
  • Dual, high pressure, dry running solid silicon carbide inboard and carbon/stainless outboard mechanical seal with self-contained oil bath cooling.
  • Mounted to a structural steel skid with integral 200 gal. (757 liter) fuel tank and lifting bail.
  • Standard engine — Caterpillar C-9 diesel. Other engines available. Electric drive version also available.
 
HL 160 Pump
Features:  
  • Fully automatic priming from dry to 28 feet (8.5M) of suction lift. Maximum heads to 600 feet (183M). Maximum flows to 2,000 gpm (126 l/sec.).
  • Handles liquids with solids up to 1-3/8" (35mm) in diameter.
  • Continuously operated venturi air ejector priming system operated by an air compressor requiring no form of periodic adjustment or operator intervention.
  • Double, high pressure mechanical seal with high abrasion resistant silicon carbide interfaces. Oil bath immersion for dry running.
  • Mounted to a structural steel skid with integral 250 gal. (946 liter) fuel tank and lifting bail.
  • Standard engine — Caterpillar 3406C diesel. Other engines available. Electric drive version also available
HL 150 Pump
Features:
  • Fully automatic priming from dry to 28 feet (8.5M) of suction lift. Maximum heads to 600 feet (183M). Maximum flows to 2,000 gpm (126 l/sec.).
  • Handles liquids with solids up to 1-3/8" (35mm) in diameter.
  • Continuously operated venturi air ejector priming system operated by an air compressor requiring no form of periodic adjustment or operator intervention.
  • Double, high pressure mechanical seal with high abrasion resistant silicon carbide interfaces. Oil bath immersion for dry running.
  • Mounted to a structural steel skid with integral 250 gal. (946 liter) fuel tank and lifting bail.
  • Standard engine — Caterpillar 3406C diesel. Other engines available. Electric drive version also available.
 
HL 130 Pump
Features:
  • Fully automatic priming from dry to 28 feet (8.5M) of suction lift. Maximum heads to 650 feet (198M). Maximum flows to 1,300 gpm (82 l/sec.).
  • Handles liquids with solids up to 1-3/8" (35mm) in diameter.
  • Continuously operated venturi air ejector priming system operated by an air compressor requiring no form of periodic adjustment or operator intervention.
  • Double, high pressure mechanical seal with high abrasion resistant silicon carbide interfaces. Oil bath immersion for dry running.
  • Mounted to a structural steel skid with integral 200 gal. (757 liter) fuel tank and lifting bail.
  • Standard engine — Caterpillar C-9 diesel. Other engines available. Electric drive version also available.
CD 300 Pump
Features:
  • Direct drive automatic priming 12" (300mm) high volume centrifugal pump with vacuum priming compressor mounted to a diesel engine. Also available in electric drive or as bare shaft pumpend.
  • Extensive application flexibility — handles raw sewage, sludges and liquids with solids up to 3-3/4" (95mm) in diameter.
  • Continuously operated “Godwin” air ejector priming device requiring no form of periodic adjustment or control.
  • Compact design — Pump is direct coupled to engine flywheel for increased reliability.
  • Underslung side discharge for easy pipe connection.
  • Double, high pressure mechanical seal with high abrasion resistant silicon carbide interfaces. Oil bath immersion for dry running.
  • Skid base incorporating integral overnight running fuel tank.
  • Simple maintenance — normally limited to checking engine oil, compressor oil and seal lubrication.
  • Standard Caterpillar C-9, Caterpillar 3126B or John Deere 6081AF engine. Also available with a variety of other engines including Cummins and Deutz.
  • Balanced unit with centralized lifting bracket for easy handling.
CD 200 Pump
Features:
  • Close coupled centrifugal pump with vacuum priming compressor mounted to a diesel engine. Also available in electric drive or as bare shaft pumpend.
  • All cast iron construction with cast chromium steel impeller.
  • Extensive application flexibility — will handle raw sewage, slurries and liquids with solids up to 3" (75mm) in diameter.
  • Continuously operated “Godwin” air ejector priming device requiring no periodic adjustment or control.
  • Dry running, oil bath, mechanical seal with abrasion-resistant, solid silicon carbide interfaces.
  • Solids handling ball type Non Return Valve with renewable flexible rubber seat and quick release access feature.
  • Compact unit mounted on skid base or two wheeled highway trailer both incorporating integral overnight running fuel tank.
  • Simple maintenance — normally limited to checking engine and seal cavity oil levels.
  • Standard engine — John Deere 4045D or Caterpillar 3054NA. Also available with a variety of engines including Hatz and Deutz.
  • Critical silence unit available for use in environments requiring minimal noise.
CD 150 Pump
  Features:
  • Fully automatic priming from dry to 28' (8.5 m) of suction lift.
  • Close coupled centrifugal pump with vacuum priming compressor mounted to a diesel engine. Also available in electric drive.
  • Extensive application flexibility — will handle raw sewage, slurries and liquids with solids up to 3" (75 mm) in diameter.
  • Dry running, oil bath mechanical seal with abrasion-resistant solid silicon carbide faces.
  • Continuously operated Godwin venturi air ejector priming device featuring belt-driven air compressor requiring no form of periodic adjustment or control.
  • All cast iron construction with cast chromium steel impeller.
  • Standard John Deere 4045D-T2, John Deere 4045T-T3, or Caterpillar 3054C-NA engine. Also available with a variety of other engines including Hatz, Perkins and Deutz.